Custom Cedar Picnic Table with Extra Seating

Pretty much immediately after purchasing the plot of forested land in Silverton, I put the word out to my local Buy Nothing community looking for building materials. I got a lot of assorted scraps of trim, plywood, and other useful bits but the very best gift I received was some 2x12 cedar. A local woman had hired someone to put in a closet, she purchased the wood, he cut it, then he vanished without completing the job. The wood sat in her garage merely making her angry, reminding her of what had happened until I put out the word that I was looking for lumber. I took one sniff of that cut lumber and knew immediately it was cedar and fell in love. I didn't initially know what I'd do with it but since I had to work with the cuts already made, I realized a table would be a great start to our outdoor space.

Untitled

The table top size was based on some of the pre-cut pieces with the addition of the end pieces which are held in place with pocket screws and some steel braces underneath. I left a lot of gaps between boards to allow for expansion but, honestly, I'm not positive those end boards will go the distance. I do hope the support braces underneath do the trick to keep them strong.

The burned design is one I created myself. I planned out the image then created a template of 1/8 of the circle and used carbon paper to trace the image onto the center of the table before I started burning it in permanently. The image took many many hours to create. I don't have professional pyrography tools and rely instead on the tips that can be used on small soldering tools.

Untitled


You'll notice in the next picture that I changed the center shape to be a circle. I decided I didn't really like how the original design looked as it took shape. There's no pattern to the roots. I just free-handed those but all the trees are connected to one another. A big part of why we decided to purchase the property was to build family memories and bring us all closer together in a place free from the routines and responsibilities of home. I hope our family always feels that same connection to one another.

Untitled

Here is a close up of the final product. The "SS" in the center represents Silverton and the first initial of our last name which is also an "S." Behind the trees are the mountains. As you'll see in the next picture, the phases of the moon encircle the mountains.

Untitled

Finally, I burned Douglas Fir branches and pinecones along the ends. I chose Douglas Fir because there are quite a few of them out on our property and because there's a legend of this particular tree that I absolutely love:

"Indigenous legend in the Pacific Northwest tells that a long time ago there was a great fire in the forest. All of the animals were fleeing before the encroaching flames. However, the tiny mice with their short little mouse-legs were not quick enough to outrun the fire. In danger of being engulfed in the flames, they asked the strong and stoic Douglas-fir trees for help. The trees were inclined to be friendly to the mice, and allowed them to climb up their thick, fire-resistant trunks and hide themselves in their fir cones. The mice gladly took shelter inside the cones, and survived the terrible fire. And even today – if you examine the cones of a Douglas-fir closely – you can see the little hind feet and tails of the mice sticking out from beneath the scales of the fir cones." (https://heartofthewestcoast.com/2012/01/26/douglas-fir-trees/)

I hope our Douglas Fir trees protect us as they did the mice.

Now, on to construction. I reused a lot of lumber I had salvaged from a friend's fence demolition but also had to purchase some cedar 2x4s for the benches. I built the whole table in the driveway and tried out my design with an end bench. We have two boys who I thought would enjoy the extra wiggle room and the higher bench sitting at the end. It worked out great so once the snow melted enough to access the property, I took all the parts out there and reassembled the table.

The custom cedar picnic table is finally in its proper place. #buildsewreap #maker #makersgonnamake #build #cedar #pyrography

Unfortunately the ground is super uneven and the only place we could get even vaguely close to level was in a spot that left that end bench really unstable. I tested it out and realized quickly that even setting my tool bag on it tipped the whole table up on end! That's a big problem.

I let the problem simmer in my mind for a few days and then, just like so many of my brainstorms, the solution popped into my brain while in the shower. I swear, stuff just blows in out of left field when I'm not even consciously thinking about something. I realized that if I cut one more leg exactly the same as the other 4, I could mount it from the end and support it with the 2x2s I had cut to keep the main legs spaced properly (not seen in the above picture).

The only problem was I had tossed out my original plans so I didn't know the length of the legs nor the angle I cut them. No problem, I grabbed a scrap 2x6 pressure treated board, tossed it in my car with my chainsaw, and we headed out for the day on big kid's 10th birthday.

I took my measurements (I think the legs were 33" long?) and transferred the markings to the new leg then on a hope and a prayer, I managed to cut the angles perfectly with the chainsaw. I was pretty proud of that one.

I centered the leg under the table and positioned it so it would just touch the front of the bench and screwed it into place from the top of the table. Then I placed a 2x2 on either side of it to hold it in place. I screwed those down to the center braces on the main legs as well as to either side of the new leg and under the bench. Now the table is more stable both in that all the legs are connected at another point and in that it can no longer tip towards the bench.

Untitled

I'm so happy with this build. I'm sorry I can't provide exact measurements but I can tell you that even though the top is a weird size thanks to the pre-cut boards, the legs are cut at the length and angle I saw on various tutorials around the internet. The additional bench and leg details are really all I added.

Some details: I cut the 6 side bench boards 11" longer than table so they could support the end bench. I also cut those at an angle to make the profile a bit more attractive. The end bench is supported by both side benches as well as the 2x2s that run down the center of the table. I positioned the legs in far enough that someone could sit on the end of the bench without having to step over a bench to get situated. All pieces are protected with an outdoor oil-based wood preserver. I'll need to redo this over time if I want it to continue to look good. I'd also like to get a tarp to keep it covered when we're not using it but the first cover I used apparently wasn't waterproof so now that the table is really wet, I don't want to enclose it until it has dried out in the summer weather. I'll find a cover before next fall.

Here's a bonus pic that makes my heart sing. That's my husband petting the dog off in the distance. The black plastic is covering some concrete supports we poured for our first structure out there.

Untitled


Thank you for reading,
Julie



26 comments:

  1. This comment has been removed by the author.

    ReplyDelete
  2. Thanks for taking the time to discuss that, I feel strongly about this and so really like getting to know more on this kind of field. Do you mind updating your blog post with additional insight? It should be really useful for all of us. this article tells you all you need to know about Best Table Saw

    ReplyDelete
  3. I definitely enjoying every little bit of it. It is a great website and nice share. I want to thank you. Good job! You guys do a great blog, and have some great contents. Keep up the good work. hinking

    ReplyDelete
  4. During this site, you will see this shape, I incredibly propose you get limit with this assessment. https://vograce.com

    ReplyDelete
  5. You have done a great job on this article. It’s very readable and highly intelligent. You have even managed to make it understandable and easy to read. You have some real writing talent. Thank you. 대전건마

    ReplyDelete
  6. I really loved reading your blog. It was very well authored and easy to undertand. Unlike additional blogs I have read which are really not tht good. I also found your posts very interesting. In fact after reading, I had to go show it to my friend and he ejoyed it as well! 꽁나라

    ReplyDelete
  7. This is actually the kind of information I have been trying to find. Thank you for writing this information. 토토사이트

    ReplyDelete
  8. Thanks for every other informative site. The place else may just I get that kind of information written in such an ideal means? I have a venture that I’m just now operating on, and I have been on the look out for such information. 꽁머니

    ReplyDelete
  9. Keep up the good work , I read few posts on this web site and I conceive that your blog is very interesting and has sets of fantastic information. 토토사이트

    ReplyDelete
  10. Great article Lot's of information to Read...Great Man Keep Posting and update to People..Thanks Lottery Sambad

    ReplyDelete
  11. In the world of www, there are countless blogs. But believe me, this blog has all the perfection that makes it unique in all. I will be back again and again. เว็บหวยออนไลน์

    ReplyDelete
  12. This is my first time i visit here. I found so many interesting stuff in your blog especially its discussion. From the tons of comments on your articles, I guess I am not the only one having all the enjoyment here keep up the good work 오피아트

    ReplyDelete
  13. Merely a smiling visitant here to share the love (:, btw outstanding style. ครีมลดรอยสิว

    ReplyDelete
  14. Hey There. I found your blog using msn. This is a very well written article. I’ll be sure to bookmark it and come back to read more of your useful info. Thanks for the post. I’ll definitely return. สล็อต 888

    ReplyDelete
  15. You have done a great job on this article. It’s very readable and highly intelligent. You have even managed to make it understandable and easy to read. You have some real writing talent. Thank you. ผื่นขึ้นหน้า

    ReplyDelete
  16. Pretty nice post. I just stumbled upon your weblog and wanted to say that I have really enjoyed browsing your blog posts. After all I’ll be subscribing to your feed and I hope you write again soon! สล็อตxo 999

    ReplyDelete
  17. Wonderful blog! I found it while surfing around on Yahoo News. Do you have any suggestions on how to get listed in Yahoo News? I’ve been trying for a while but I never seem to get there! Appreciate it. Nagaland State Lottery

    ReplyDelete
  18. Wow, this is really interesting reading. I am glad I found this and got to read it. Great job on this content. I like it. Nagaland State Lottery

    ReplyDelete
  19. You’ve got some interesting points in this article. I would have never considered any of these if I didn’t come across this. Thanks!. 909 16th st, modesto ca 95354

    ReplyDelete
  20. 스포츠토토분석 Wow, amazing blog layout! How long have you been blogging for? you make blogging look easy.

    ReplyDelete
  21. Thank you very much for sharing this article. It 토토사이트 and design has good features.

    ReplyDelete
  22. salwar kameez online uk ALL DELIVERIES TO EU ARE EXPERIENCING DELAYS DUE TO COVID 19 - CUSTOMS & DUTY MAY NOW BE APPLICABLE FOR EU CUSTOMERS. SHOP NOW

    ReplyDelete
  23. i am visited this website. i liked this website.its stuff is very good and fantastic.

    ReplyDelete
  24. Great article Lot's of information to Read.
    Ready made lawn suits uk are a convenient and fashionable option for women in the UK seeking comfortable summer attire.

    ReplyDelete
  25. I’m glad to become a visitor in this pure site, regards for this rare info.its stuff is amazing.

    ReplyDelete

Related Posts Plugin for WordPress, Blogger...